Skip to content
EncryptTechBD
Home Industries Our Work Blog Pricing About Contact Discuss Your Project
বাংলা (BN)
Industry Playbooks 6 min read

Small factory production reporting: a buying guide

How small factories should buy production reporting: shift-level data, downtime reasons, KPI definitions, purchase routes, scoring and a one-line pilot.

E
EncryptTechBD · 0 comments
Worker with a tool belt on a construction site
Photo: Leeroy / StockSnap

On most small factory floors, the numbers already exist. They sit on shift sheets, in a supervisor's notebook, in a messaging group and in the accountant's spreadsheet. The problem is not the absence of data but the delay: by the time output, downtime and scrap are summarised, the shift that could have acted on them is over.

This buying guide is for an owner or plant manager at a small or mid-sized factory in Bangladesh who wants production reporting that supervisors will actually use. It covers the reporting rhythm, the requirements to specify, the routes to a working system, a scorecard, commercial questions and a one-line pilot.

Decide the rhythm before the software

A production report is useful only if it arrives while someone can still change the outcome. Shift reporting supports decisions about the next shift: which line to prioritise, which machine needs attention, which material is short. Daily reporting supports planning and maintenance scheduling. Weekly reporting supports trends, supplier performance and capacity decisions.

Write down the decision each report supports and the latest time it can arrive to be useful. A live dashboard that nobody looks at is more expensive than a shift sheet that the supervisor discusses at handover. The cadence should drive the data collection method, not the other way around.

What to specify before you shortlist

  • Output by line, shift, product and SKU, including good units, rejected units and rework.
  • Downtime with reason codes, split into planned, unplanned and changeover, with a start and end time.
  • Scrap and rework, captured at the point they occur rather than reconstructed at month end.
  • Work in progress and material consumption, sufficient to reconcile output with issued material.
  • KPI definitions in writing, especially availability, performance, quality and overall equipment effectiveness, with the formula and the data source for each input.
  • Operator entry time, tested with a supervisor during a real shift, not estimated by the vendor.
  • Offline or intermittent-network behaviour, with a clear sync rule and conflict handling.
  • Language and labels, including Bangla where supervisors work in Bangla.
  • Integration and export, covering ERP, accounting, dispatch and a full data export.
  • Audit and correction, so a wrong entry can be fixed without deleting the original record.

Four routes to a working system

An ERP production module keeps production data beside purchasing, inventory and costing. It suits a factory that already runs the ERP well and whose reporting needs match the module's model. The risk is a heavy configuration project for a shop floor that needs a simple shift entry screen.

A standalone manufacturing execution system offers deeper control over routings, machine states and quality. It is justified when the process is complex and the factory can support the implementation. For a small plant with three lines, the feature depth can become unused cost.

A spreadsheet with a reporting tool is fast to start and flexible. It works when the factory has disciplined shift sheets and one person who maintains the workbook. It breaks when the workbook owner leaves, or when two versions circulate with different totals.

A lightweight custom application fits a process that is simple but unusual: a few lines, local language, offline entry, specific downtime codes and a report that matches the daily meeting. It requires a maintenance arrangement, because custom software is a recurring commitment rather than a one-off purchase.

Scoring production reporting options

CriterionEvidence to requestScore 1–5
Shift entryA supervisor completes a realistic shift in a demonstration
Downtime analysisReason codes, duration and a report that shows the largest losses
KPI definitionWritten formulas and a worked example using your numbers
Offline behaviourA test with the network disconnected and restored
IntegrationA named path to ERP, dispatch and accounting
Support modelResponse time, local presence and who fixes a broken report
ExitFull export of production records and configuration

Commercial questions for the vendor

  • Is the price based on lines, machines, users or data volume? How does it change when a fourth line starts?
  • Are machine connections included, or quoted per machine after a site survey?
  • Does the fee cover configuration of reason codes, shifts and reports, or only the licence?
  • What hardware is required, and who supports it on a public holiday?
  • What does the annual support cover when a report is wrong or a formula needs changing?
  • Can we export every production record without the vendor's help?

Pilot one line for one month

Choose a line with a cooperative supervisor and a measurable output. Run the new method alongside the existing sheet, not instead of it, until the numbers reconcile. Agree the acceptance tests at the start and review them weekly.

  • Shift entries are complete for every shift in the pilot period.
  • Output reconciles to dispatch or finished-goods records within the tolerance agreed at kick-off.
  • Downtime is coded consistently, and the top three losses are visible in the report.
  • The report is ready before the daily production meeting, not after it.
  • Supervisors can correct an entry without help, and the correction is audited.

Handover, ownership and exit

The factory should own its production data, reason-code list, report definitions and any machine configuration. Ask for a data dictionary and an export in a documented format. If the vendor supplies a gateway or logger, confirm what happens to stored data when the contract ends. Training should include the person who will maintain the system after the project team leaves.

Signals that the scope is too thin

  • The demonstration shows dashboards but no shift entry screen.
  • OEE is promised without a written formula or a source for each input.
  • Machine integration is described as simple, with no site survey.
  • Reason codes are fixed by the vendor and cannot be changed by the factory.
  • Support is described as remote only, with no response expectation.
  • The only reporting output is a PDF that cannot be queried.

Making the call

Choose the ERP module when production data must sit beside inventory and costing and the ERP is healthy. Choose an MES when complexity justifies the depth. Choose a spreadsheet when the process is stable and a named owner will maintain it. Choose a custom application when the process is simple, local and poorly served by generic tools. In every case, pilot with real supervisors on a real line.

Shop-floor reporting and production dashboards are built under Custom Software & Integrations, designed around the daily production meeting. The pricing page explains how a pilot converts into a full rollout. For the reporting layer above the shop floor, read the business KPI dashboard buying guide.

Sources

Services that deliver this

Want this implemented properly?

Pricing →

Every engagement starts with a written scope. If a requirement is outside it, we quote it separately before starting.

Responses (0)

No comments yet. Add the first one below.

Leave a response

Your email address will not be published. Required fields are marked *.

Keep reading

More field notes